Mold In Graphic Systems® permanent graphics permanently decorate, label and add value to your polyolefin plastic products
|
Mold In Graphic
Systems® supplies quality construction and service for all our permanent Mold In Graphics® and Mold On Graphics® and Enhancement Products.
Since 1983 our PERMANENT graphics have held up under the most extreme environmental conditions or when exposed to chemicals. Try them and you will not be disappointed.
After years of QC testing, all Mold In Graphic Systems® products have proven to be INDESTRUCTIBLE - no matter what humans, the weather or solvents do to them.
Two methods for applying our permanent graphics -- in the mold or after molding.
The choice is yours:
• Permanent Mold In Graphics® are applied in the mold, during rotational molding.
• Permanent Mold On Graphics® are applied after molding your plastics. They're the post-mold solution for plastics products produced in Injection Molding, Blow Molding, Thermoforming, Structural Foam Molding, Sheet and Profile Extrusions and Rotational Molding.
MIGS® Graphics permanently decorate and add value to your polyolefin products. Please click the photo link above for the latest issue of our e-zine, Plastics Tactics. Get your own e-copy of Plastics Tactics by emailing us at webmaster@moldingraphics.com.
All of our products are:
- + a raw polyolefin material
- + 100% compatible with the products they are molded into
- + designed to be used with the raw materials most commonly used by rotomolders
What is a Mold In Graphic Systems® graphic?
It is a slice of PE that is completely and permanently integrated into the polymer matrix during the molding cycle. No inks, substrates, or foreign contaminants are used. This is an important consideration for rotomolders because introducing foreign materials into the polymer can result in degradation. Worse still, this could cause part failure.
Our 100% compatible permanent MIGS® Adhesives are used with our permanent Mold In Graphics® and Mold On Graphics®. These Adhesives leave no foreign residue or rubbery build-up on the mold or on the part. The result: a better quality product and less mess for you! We have followed this principle with all the products that have been developed over the past 26 years.
We prove our graphics' permanence on this product - you can see a brand-new-looking Mold In Graphic® rotomolded into the Easy Roller. But actually it is 26 years old!
 |
| A picture speaks a thousand words! This reflects a partnership between Polycast and Mold In Graphic Systems®.
Read a testimonial from Peter Unkles, Retired Rotomolder, Linpac Rotational Mouldings, on our Testimonials page. We take pride in our product quality. |
Mold In Graphic Systems® puts our graphics through 6 Torture Tests
Click on Mold In Graphic Systems® Extensive Testing Program to read about the 6 torture tests which we use to test our permanent graphics.
Read more about our permanent Mold In Graphics®, Mold On Graphics® and MIGS® Enhancement Technologies. Call us at 1-928-634-8838 for a free sample.
When you want your polyolefin products to look their very best, why look any further?
To everyone who has put their trust in us today and throughout the years, we at Mold In Graphic Systems® thank you!
Please click the button at right to read a RotoWorld article on the rotomolded ECM Lifeboards for African school children who have no desks.